Push In, Pop Out, Fill Up, No Lingering.

Push it straight onto the valve and it holds while you pump. Thumb the release and it pops off. No lever, no threading, no bending a Presta stem sideways — one hand, gloves on, in the cold.

One port takes Presta and Clik, the other takes Schrader, and it fits floor pumps, shop compressors and cordless inflators. Die-cast alloy body, dual sealing system, rated to 150 PSI — not a consumable.

Two versions — check your hose first: The head is identical. The difference is how it attaches to your hose. Look at the end of the hose you already own and pick the one that matches.

Schrader Thread: Your hose ends in a Schrader head — or a screw thread. Screws straight on: ten seconds, no tools, nothing cut. Most cordless and electric inflators end this way. Removable — move it between pumps.
Compression Nut: Your hose has no head on it — bare rubber hose. Trim the hose to length; the nut and ferrule seal onto it, like a plumbing compression fitting. Fits 8–11 mm (5/16–7/16 in) outer-diameter rubber hose, nut and ferrule included. Permanent — and it fits pumps nothing else fits.
Fits the pump you already own: Floor pump, cordless inflator or shop compressor — the Quickie replaces the head on the end of the hose, not the pump.
One head, three valves: One port takes Presta and Clik, the other takes Schrader. Turn the orange collar from P to C for Clik and the gauge reads real pressure.
Floor pumps: Screw onto a Schrader-headed hose, or convert a bare hose with the Compression Nut version.
Cordless inflators: Most end in a Schrader head, so the Schrader Thread version screws straight on. Check the end of your hose.
Shop compressors: Rated to 150 PSI / 10.3 bar. Replaces the air chuck on a compressor hose.

Features:

Leverless Push-To-Lock: Push onto the valve to lock automatically, and press the quick-release button for an instant, effortless pop-off.
Triple Valve Compatibility: One head fits Presta, Schrader, and Clik Valve systems seamlessly without swapping any internal parts.
Dual-Spec Conversion: Available in two specs. Install it as a permanent floor pump hose conversion, or screw it onto an existing Schrader head.
Accurate Clik Valve Readings: Ensures full mechanical compatibility with Clik Valve systems for precise, real-time gauge pressure.
Premium Metal Build: Built to last with a heavy-duty, full-metal construction that offers a sleek and rugged finish.

Specifications:

Type: 3-in-1 quick connect air chuck / pump head
Valve compatibility: Presta, Schrader, Clik-compatible
Body: Die-cast alloy, dual sealing system, 90° hose exit
Max pressure: 150 PSI / 10.3 bar
Versions: Schrader Thread (GQK26S) · Compression Nut (GQK26H, fits 8–11 mm OD rubber hose, nut and ferrule included)

Granite Design Quickie Pump Head